- Updated for January 2025
- Based on 2025 AZ commercial driver's license manual
Free Arizona CDL Combination Practice Test 2025
Several key economic sectors in Arizona employ drivers of semi-trucks and tractor-trailers. Here are some examples. The state’s most important agricultural products include citrus, cotton, and dairy, which are exported to the rest of the United States and worldwide. Long-haul truck drivers transport these products. The copper-mining sector is vitally important to the state’s economy. Trucks transport equipment to the copper mines and transport copper from them. Arizona also shares a border with Mexico, creating a demand for trucking jobs in cross-border trade with Mexico.
Major truck routes in Arizona include Interstates 8, 10, 17, and 40; U.S. Routes 60, 93, and 191; and State Routes 85, 87, 347, Loop 101, and Loop 202. However, truck drivers should watch out for extreme heat conditions in the summertime, when temperatures of over 110°F can cause tires to blow out or vehicles to overheat. They should also watch out for Arizona’s monsoon season (typically from June to September), with its dust storms, heavy rainstorms, and flash floods.
To drive commercial motor vehicles (CMVs), you must have a Commercial Driver’s License (CDL). There are three classes of CDLs: Class A, Class B, and Class C. To drive semi-trucks or tractor-trailers, you must obtain a Class A CDL. This class of CDL allows you to drive any combination vehicle whose gross combined weight rating (GCWR) is 26,001 or more pounds and the gross vehicle weight rating (GVWR) of the towed unit is 10,001 pounds or more.
To get a CDL of any class, you must meet a number of requirements. One of them is to pass the official written knowledge test on the general theory of commercial driving. But to drive combination vehicles with a Class A CDL, you must also pass the Combination Vehicles knowledge test on the theory of operating combination vehicles. That’s likely while you’re here. You’re concerned that just reading the official Arizona Commercial Driver License Manual
(Arizona CDL Handbook 2025) may not give you enough grasp of the subject to enable you to pass the Combination Vehicles knowledge test. (We hope you didn’t learn that lesson the hard way.)
This free Arizona CDL Combination practice test is based on the above study guide, just like the official knowledge test. It’s up to date as of January, 2025. It has 25 questions and answers that address such topics as safe driving techniques, combination brakes, and coupling and uncoupling. Unlike the official knowledge test, each question comes with a helpful hint and an explanation of the correct answer. This practice test isn’t timed; take your time and learn as much as you can from the experience.
- Perfect for first-time and renewal CDL/CLP applicants, and those adding endorsements
- Triple-checked for accuracy
What you need to know
What to expect on the actual AZ MVD exam
questions
correct answers to pass
passing score
Helpful links
List of questions (classic view)
- After you lock the kingpin into the fifth wheel, how should you check the connection?
- After you connect the air lines but before you back under the trailer, you should
- Which statement best illustrates the "crack-the-whip" effect?
- When you inspect the landing gear after uncoupling the trailer, where should the tractor be?
- What is the safest way to turn right from a two-way road?
- To drive a triple combination vehicle, you must have
- To prevent a rollover, cargo should be
- Combination vehicles take longer to stop when they are empty than when they are fully loaded, because
- If your vehicle gets stuck on a railroad track, you should
- Low-slung vehicles can be risky at railroad crossings because
- On a double or triple vehicle, which wheels offtrack the most?
- When you're pulling doubles or triples, the shut-off valves should always be
- On a trailer, where is the yellow antilock brake (ABS) malfunction lamp located?
- Even before antilock braking systems (ABS) were required, some vehicles already had them. How can you check if your vehicle has ABS?
- An antilock braking system (ABS) is useful
- After coupling, make sure that the air lines are not crossed. How should you do this?
- During uncoupling, you should disconnect the electrical cable and
- Before you start to uncouple, you must
- You can confirm that air is going to all brakes in your trailers by
- To uncouple a loaded trailer, after the landing gear has made firm contact with the ground, you should
- If the trailer has antilock brakes (ABS) but the tractor doesn't,
- To test the tractor protection valve, charge the trailer air brake system, turn off the engine, and
- If your test of the tractor protection valve is successful,
- The tractor protection valve is designed to close automatically if the air pressure falls into the pressure range specified by the manufacturer, typically
- As part of your vehicle inspection test, if your vehicle is equipped with air brakes and has a trailer, you will inspect the air connections between the truck or tractor and the trailer. Make sure that the ________ are locked in place and free of damage or air leaks.
- Alabama: Test 1 / Test 2
- Alaska: Test 1 / Test 2
- Arizona: Test 1 / Test 2
- Arkansas: Test 1 / Test 2
- California: Test 1 / Test 2
- Colorado: Test 1 / Test 2
- Connecticut: Test 1 / Test 2
- Delaware: Test 1 / Test 2
- District of Columbia: Test 1 / Test 2
- Florida: Test 1 / Test 2
- Georgia: Test 1 / Test 2
- Hawaii: Test 1 / Test 2
- Idaho: Test 1 / Test 2
- Illinois: Test 1 / Test 2
- Indiana: Test 1 / Test 2
- Iowa: Test 1 / Test 2
- Kansas: Test 1 / Test 2
- Kentucky: Test 1 / Test 2
- Louisiana: Test 1 / Test 2
- Maine: Test 1 / Test 2
- Maryland: Test 1 / Test 2
- Massachusetts: Test 1 / Test 2
- Michigan: Test 1 / Test 2
- Minnesota: Test 1 / Test 2
- Mississippi: Test 1 / Test 2
- Missouri: Test 1 / Test 2
- Montana: Test 1 / Test 2
- Nebraska: Test 1 / Test 2
- Nevada: Test 1 / Test 2
- New Hampshire: Test 1 / Test 2
- New Jersey: Test 1 / Test 2
- New Mexico: Test 1 / Test 2
- New York: Test 1 / Test 2
- North Carolina: Test 1 / Test 2
- North Dakota: Test 1 / Test 2
- Ohio: Test 1 / Test 2
- Oklahoma: Test 1 / Test 2
- Oregon: Test 1 / Test 2
- Pennsylvania: Test 1 / Test 2
- Rhode Island: Test 1 / Test 2
- South Carolina: Test 1 / Test 2
- South Dakota: Test 1 / Test 2
- Tennessee: Test 1 / Test 2
- Texas: Test 1 / Test 2
- Utah: Test 1 / Test 2
- Vermont: Test 1 / Test 2
- Virginia: Test 1 / Test 2
- Washington: Test 1 / Test 2
- West Virginia: Test 1 / Test 2
- Wisconsin: Test 1 / Test 2
- Wyoming: Test 1 / Test 2
Your go-to, trusted source
Experience the Driving-Tests differenceOur commitment to accuracy and quality in our practice tests
Explore our rigorous, multi-tiered verification process that ensures each question mirrors the official manual for unparalleled accuracy.
At Driving-Tests.org, we understand the importance of reliable and accurate practice tests to help you prepare for your DMV exam. That's why we've developed a meticulous process to create and continually update our practice questions, ensuring they reflect the most current driving laws and regulations.
Here's an inside look at how we maintain the highest quality in our practice tests.
Content Creation and Verification Process
- Alignment with Official Manuals:
Every question we develop is based on the most recent version of each state's official driving manual. Our team regularly monitors each state DMV's website for the latest updates to ensure our practice tests are always aligned with the most current information. - Community Feedback Integration:
We leverage feedback from our vast community of users to understand which topics are most frequently tested. This helps us focus on the areas that are most relevant and beneficial for your preparation. - Expert Content Creation:
Our in-house editor, Steven, who has extensive experience in driver education, crafts each question with precision. He conducts a thorough review of each question against the official manuals to ensure accuracy. - Rigorous Review Process:
Once Steven has finalized a set of questions, our team conducts a joint review session. This second level of scrutiny involves content accuracy, proofreading, and fact-checking to eliminate any errors. - User Feedback Mechanism:
After a question goes live on our site, we keep the lines of communication open. Each question features a feedback button, inviting users to report any issues or errors. This continuous feedback loop allows us to address and rectify any concerns promptly. - Responsive Updates:
In line with our commitment to accuracy, we quickly update our practice questions to reflect any changes in the DMV manuals. Additionally, we update the free electronic copy of the state's driver's license manuals on our site, typically within a few days after the DMV publishes them.
Our thorough quality control process ensures that you have access to practice tests that are as accurate and up-to-date as possible. We believe in the power of well-prepared drivers and are dedicated to providing you with the best study tools to help you succeed on your DMV exam.
Get your ELDT certificate and pass CDL exams the first time. Guaranteed.
Get full access to our 3-in-1 program, starting at $79. CDL schools charge $3,000-$4,000 for that.
All 1,500 AZ exam-like questions
Pass Guarantee: pass your permit exam, or get your money back
ELDT certification included
Official FMCSA-approved provider, instant completion reporting
Industry-leading 99.06% success rate
Compare with the average US passing rate of 49%
Trusted by over 1.15 Million customers
The only program recommended by DMVs
